Front End Suspension Rebuild Kit Idler Arm Compatible with Ford Mustang Power Steering (Except 69 Eliminator) OEM Spec Replacements (23 Piece Kit)

This Kit is constructed using High-Quality OEM spec replacements for 1968 and 1969 Ford Mustangs Power Steering (Except 69 Eliminator). These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Bushings (2 Each), Strut Rod Kit (4 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.

• YEARS: 1968 and 1969
• MODELS: Compatible with Ford Mustangs with Power Steering (Except 69 Eliminator)
• HIGH-QUALITY: OEM Spec Replacements
• INCLUDED IN THE 23 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Strut Rod Kits (4 Each), Idler Arm
• ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.